Oklahoma City Thunder Multi-Part Remix

Made this for a family member, but wanted to print it in multiple colors so I split up the original thing into parts for printing. The orange parts of the basketball needed to be trimmed in order to fit. They could be scaled down a little bit before printing. I didn't have teal so I used a light blue color.

This is 1.5 times bigger than the original to make it easier to print the parts, but even so a couple parts are very small.

Parts 1-2 can be printed with 25% infill. Print parts 3-5 at 100% infill. They are small and only take about 30 minutes or so to print.

Glue parts together after printing. I used SCIGRIP acrylic glue it doesn't leave a white residue like super glue but it can be runny. Use only with good ventilation and recommend wearing gloves, but it really holds!