Weed Jar II for Dual Color

As requested here is the weed jar II for dual-color printers.

This should also work with regular printers if you want to print the different parts and glue them together. The outside of the jar will need to be enlarged a little bit in the x and y direction for this to work.

I've also separated the threads so they may be printed without support.

Please post any makes!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.12

Infill:

25%

Filament: Your Choice Your Choice Your Choice

Notes:

Notes:
Print all parts as orientated. A smaller resolution with 25% infill should print well. Supports are needed for the bottom of the lid and some post-processing may be necessary for a good fit of the threads after the supports are removed.