Raspberry Pi Camera Mount for 2020 profiles

NOTE: NOT FOR THE ORIGINAL RASPBERRY PI CAM ! -- THIS CASE FITS ONLY SMALL FOOTPRINT M12 MOUNT CAMERA MODULE

This is a Raspberry Pi camera enclosure with mounting parts for 2020 aluminum profiles with v-slots. You may not need all of the parts, or print more for an even more flexible positioning. The case is designed for the camera module with M12 lens mount (typically offered together with a wide angle lens). All connections are suitable for M4 x 10 screws and should work with just the screws self-threading into the plastic.

Print Settings

Printer:

TronXY X5S

Rafts:

No

Supports:

No

Resolution:

0.3mm layer, 0.6mm nozzle

Infill:

15% Honeycomb

Notes:

Printed with 3 shells. Might need some sanding for the camera board holder part so it can slide into the enclosure's rear part without excessive force.