PLEASE READ THE PRINT INSTRUCTIONS!
TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS!
After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be more sharp too...
——————————————————
This is a print bed scraper remix from Luked's original one. I created a similiar version with some smooth edges and different dimensions. Also the original part made by Luked had some mesh errors which caused some strange lines on the printed part.
Category: 3D Printer Accessories
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0,07
Infill: 10%
Filament: Prusament PETG Jet black
Notes:
I printed it with high detail (0,07mm) because this makes the shaper more stable and it looks smoother.
After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be more sharp too...
The author marked this model as their own original creation. Imported from Thingiverse.