Ender 3 Z-Stepper motor bracket. Works with dual leadscrew

A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed)
5
52
0
450
updated April 30, 2022

Description

PDF

A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

200

Infill:

50-100

Filament: Generic ABS, ASA or PETG Black


Notes:

Print with side having the motor connector clearance notch facing down.

Post-Printing =============

Installation:

Attach to stepper motors using M3 x 8mm long screws (4X per mount). Attach to frame using M5 hardware: T-Nuts, M5 X 12mm long screws (2X each per mount). Flat and lock washers recommended under all hardware. Mount so stepper motor rests directly on frame. Slide mount forward/back until leadscrews are parallel with frame upright and tighten M5 hardware to lock in place.

How I Designed This ===================

Modeled in FreeCAD (Linux) using data from the open source Ender 3 cad model.

Category: 3D Printer Parts

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License