As it as a box for jewelry, it can be a nice gift for your girlfriend or your mom.
I suggest to print the "Top Cover" at a standing position (at low speeds) as it has small details - also put a raft below it to have enough build plate adhesion.
The "Base" can be printed upside down - it is optional. You can calculate the amount of support needed in both position.
The "Leg" and the "Buttons" are small so don't print them 1 by 1.
As i drawed the model with tight tolerances the physical part can be too tight and the drawers will move hardly - as an option you can try to resize the drawers or sand them until it will move freely.
For the assembly i used epoxy, to glue them together.
Category: JewelryThe author marked this model as their own original creation. Imported from Thingiverse.