3dsets Model7 Buggy servo arm adpter

Remix of this Model7 Buggy servo arm adapter to work better with the servo horns I purchased on Amazon: https://www.amazon.com/dp/B07D56FVK5.

Changes:

• Holes for mounting the servo arm increased to 3mm
• Center hole enlarged to allow mounting the adapter between the horn and the servo to reduce the required clearance inside the the servo housing on the buggy.
• Decrease the size of the holes for mounting the steering rods so that the screws have more to bite into. They seemed a little loose on the original.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.20 mm

Infill: 

20

Filament: Prusament PLA 
 

Notes:

I increased the perimeter count to 3 to have more walls around the screw holes, not sure its required though.