This is a stand when used with some DIN Rails makes a useful electronic
prototyping rig. You will be able to move your prototypes easily with it. In
the picture, the bottom part of the stand is 20 mm higher than the height in
the supplied STL file. It makes the stand more practical. You will find on
Thingiverse or Printables many accessories. Search for DIN Rail.
M4 nuts and bolts are recommended for assembly.
You will need to print at least 2. Support material is not needed. An infill
of 20% is recommended.
This object main web page is:
http://www.ctheroux.com/din-rail-prototyping-stand/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.
The author hasn't provided the model origin yet.