i3 Mega HotBed Cable Holder

This is a simple Hotbed cable for the i3 Mega, the print is small and simple and easy to attach

How to Attach

1. Record the height of your bed in the 2 screws on the right side since you'll be loosening the screws
2. Unscrew the 2 right side adjusters
3. Slide the HotBedCable to the top right corner and make sure it covers the hole and the clip is facing to the back (Thumbnail for reference)
4. rescrew the adjusters back on and measure them back to their original length
5. Slide cable in clip, it can be a little tight but ensures it holds on

Notes:

I might add a zip tie attachment to hold it better if people have some troubles with it

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

25-50%

Filament: AnyCubic PLA Black

Notes:

Custom Supports is optional but I didn't need them at 50mm/s

The Beginning

I originally looked for a cable holder but they were for an older version of the i3 Mega, this supports the new version (I bought mine on December 2019)