Bebe Stool

Introduction

Meet Bebe, the 3D printable stool for all of your small furnishing needs! Bebe is designed with the following goals in mind:

• Be 100% 3D Printable on a 200x200x200mm build volume printer (compatible with printers such as Ender 3 or Ender 3 clones, Prusa Mk3 series printers, etc.)
• Use easy-to-find fasteners to assemble together
• Can withstand the rigours of use from a growing toddler (this is a test in progress, and future revisions are still to come)

There are 12 3D printable parts altogether, fastened together with M5 screws. Each “quadrant” of the stool has a seat, top leg, and bottom leg. Print each part with differently coloured filament to add fun accents to your playspace.

Additional Hardware Requirements

8 - M5 x 16 BHCS (Hex Preferred)

24 - M5 x 20 BHCS (Hex Preferred)

Recommended Print Settings

Tested with PLA and PETG.

At least 0.2mm layer height.

3 Perimeters for all parts.

5-10% infill for Seat, 30+% infill for Top Leg and Bottom Leg.

Supports for Seat and Bottom Leg, No Supports for Top Leg.

Assembly Instructions

• Assembly Time: 90 minutes
• NOTE: Use a high quality Allen wrench to assemble. Parts are self-tapped.

1. Print all parts. Label each part with its corresponding number (parts with same number are fastened together.
2. Assemble each Leg. Connect bottom piece of leg to top piece. Fasten together with M5x16 bolts.
3. Assemble seat. Align four quadrants of seat together and fasten together with M5x20 bolts. 
4. Attach legs to seat. Attach one leg at a time. Allow for time to self tap threads.