Simple Dungeon Token mini for D&D

inspired by an old set of tokens I had found on this site. https://www.thingiverse.com/thing:2591952

I found that the readability was not that great on some numbers. I decided to make a simple token with easier readability as well as multi material support. Though I have set them up to work as both single and multi material.

For printing with a single color printer and getting a color change for the bottom at 0.2mm layer height you can do a switch after the first layer to color the skull then change back on the third layer and for the top a color switch at 2mm will result in just the ring and number being a different color from the base.

I have included the 25mm tokens with 1-12 as well as a blank. I have also included the openSCAD files, fonts and svgs that were used to create them so you can generate them in any sizes or numerations.

The svg is a creative commons license and was obtained from https://www.svgrepo.com/svg/66890/skull-and-bones

Font was obtained from fonts.google.com and is "Almendra"

I have also created a set of tokens based on the JoCat Crap Guide to D&D class icons. https://www.printables.com/model/179719-dd-tokens-simple-jocat-style-for-classes

Print Settings

Printer Brand:

Prusa

Printer: 

MMU2s

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

15%

Filament: Generic PLA Fuchsia, Black, White

Notes:

This was printed on the MMU but can be done via color switch at layer 2 and 2mm layers when printing at 0.2mm layer height or paint after printing using the non-mmu files.

Post-Printing =============

Category: Games