Hi Point carbine stock filler

This is a set of plates to make the stock of the Hi Point Carbine look better.

They can easily be installed with a set of Chicago screws or, if necessary, with a small dowel rod.

I recommend the screws because gluing in the rods will be permanent. I used these screws:https://www.amazon.com/gp/product/B08LL53P11/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I do not know if this will fit any model besides the 995. It should be the same shape, but it may need to be scaled.

Print Settings

Printer:

Artillery SW X1

Rafts:

No

Supports:

No

Resolution:

.18

Infill:

20

Filament:

Solutech PLA

Black, Orange, any

Notes:

Easy to print on almost any printer, no rafts or supports

How I Designed This ===================

I started by taking a picture and filling in the parts I wanted

Then I converted to SVG using online tools. Then I imported to Tinkercad and evolved the current design.

After I was complete I found a product sold on Amazon which was very similar:https://www.amazon.com/gp/product/B07V6HHRVS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

If you print this it will be a bit thicker and a little more solid, but the Tejas product is pretty good and comes with decals and screws, so if you want this ready made, or with different patterns including real wood, I would recommend it.

Category: Outdoor & Garden