Interlocking small Picket Fence

(Update) Using them more, and from feedback from others, I've added hooks and loops to each of the parts to make placement easier.

It's a tiny picket fence. They're pretty cute to add to a potted plant or around smaller plants in your garden. Start with a single “left end” which will hook onto as many “repeating fences” as you'd like and cap it off with an end post. 

Print settings I use: Print flat on their back with supports. The supports are only needed for the hooks and you should block supports on the loops. I'm using pretty standard settings for everything else; 0.4mm nozzle, 0.2mm layer height, 2 walls, 20% infill, and 3 top/bottom layers just to speed them up a tad.