Death Star as Bauble, Box, Keyring, Earring, Lamp shade, Matrioshka, Fridge magnet
153
722
7
5149
updated August 23, 2022

Description

PDF

A big set of Death Star models as

  • Bauble (with a ring or inside-hole) - named 'ball' - 8cm diameter
  • Box (can work as a bauble too, you can put sweets inside :)) - 8cm
  • Keyring - 3cm
  • Earring - 2cm
  • Lamp shade - 8cm
  • Matrioshka (when printed few models in different size)
  • Fridge magnet
  • Stand for Death Star (rectangle / triangle , with / without holes , with carved / domed letters)

It's a redesigned model of my old Death Star Box 
Changed texture and UV map and added a lot of different model versions

Texture used (I modified it) is from here
http://3dmoddeling.blogspot.com/2011/12/blog-post_12.html

---

Model of a box is made of 3 elements - top, bottom and a thread
No glue needed
'For-supp' models will need supports
Thread is in two versions. Use 'thread_lower' if you will have some problems (a big gap between top and bottom parts when assembled) - I used it when printed models with 0.6mm nozzle
There is a bottom model with a thread included - box will be little lighter and easier to use but will need supports
As an example for simple box, printed without supports, use:
deathstar_box_v2_bottom
deathstar_box_v2_THREAD
deathstar_box_v2_top_NO-hole
and an optional - deathstar_v2_stand

Matrioshka was tested with 100%, 75%, 50% boxes (with flat roof) and 25% ball. You can print some more with lower size changes (maybe each 20%)
With round roof (models 'for-supp') there is more space so you can print even more
Models of a box with size of around 50% and less will need 0.1mm layer hight (I printed with 0.2mm and there is a little gap on some layers). Models of a box smaller than 40% may need smaller nozzles (than typical 0.4mm)

Lamp-shade is a ball with cutted off bottom part. You can put it on the electric candle or other light source (no open fire) - as on first photo

Earring, Keyring and a Fridge magnet are with little changed model compared to original.
There is not that much details on them but you can see each section more clearly than on original model resized to the same size

---

Models of a ball, keyring, earring, and bottom part of box with a thread and top and bottom parts named 'for-supp' will need supports

100% size models printed on JG Maker A1 with 0.6mm nozzle with Galaxy Black PLA from Devil Design
0.2mm layer hight (0.1 recommended for smaller models)
75% and smaller printed on Creality Ender 3 with 0.4mm nozzle with black PLA

---

There is an Egg Star Box too as an Easter Egg Death Star
https://www.printables.com/model/163711-egg-star-box

More Xmas decorations will be uploaded in december or little earlier
You can check my older designs on other 3d printing sites (in profile description)

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more