This adapter allows you to use a standard AA battery to be used in devices requiring a "C" battery type. This adapter is super simple to use - just slide the AA battery into the adapter and push until it clicks in place. The battery can easily be removed by simply pushing the battery back out of the adapter on the positive end.
I designed this one so that it would actually secure the battery in place within the adapter once pushed in so it wouldn't slide out as easily. A lot of the other adapters work fine but some of them don't always secure the battery from sliding around when loaded in place. No supports required at all for this, just print in the orientation provided in the .stl file.
I'm still learning a lot with 3D printing and desining in Fusion, so any feedback is appreciated!
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
15
Filament: Mika3D PLA Red
Notes:
No supports needed, just print as-is from the .stl file (with the secure prongs up and the coin ridge end down.
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.