Mobile Rings for hanging 3D prints
25
32
0
762
updated December 1, 2022

Description

PDF

This is a mobile I created for my friends when their first-born son was on the way. The design allows for nearly any object to be hung on it so long as it generally is balanced within ~20g on either side of each ring. Having it slightly off-balance actually helps it move in a more interesting way.

It is entirely 3D printed except for the use of .008mm diameter, 4lb monofilament fishing line and super glue. To hang objects without hooks I drilled a small hole (~1.8mm diameter) at the approximate center of gravity of each printed object. I then tied a knot on the end of the filament, inserted it into the hole, and put a plug of the same filament used to print the object in the hole and super glued it into place.

The only custom designed part is the ring that holds everything together. I printed two of them at 100% and 50%. You could easily increase the size of the mobile by adding a third ring if desired.

I used the following models as things to hang on the mobile:

X-Wing https://www.thingiverse.com/thing:909499

Millenium Falcon https://www.thingiverse.com/thing:2829181

Butterfly https://www.thingiverse.com/thing:3005712

Sloth https://www.thingiverse.com/thing:3698710

Parrot https://www.thingiverse.com/thing:215086

Mushrooms https://www.thingiverse.com/thing:16146

Mushroom Lamp https://www.thingiverse.com/thing:3565593

Narwhale https://www.thingiverse.com/thing:3421767

Music Notes https://www.thingiverse.com/thing:2007278

Pirate Ship https://www.thingiverse.com/thing:2405629

Calvin & Hobbes https://www.myminifactory.com/object/3d-print-calvin-and-hobbes-35230 (this was by far the most difficult thing to print because of all the parts and how much I had to scale it down; I ended up painting the stripes, eyes, and details manually because of all the issues I had printing it)

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Filament:

Any PLA

Notes:

I printed most objects so they were a height of ~3inches. Then scaled them based on total weight or increased infill to provide balance to the mobile.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License