Soft Case for the Galaxy Tab S6 Lite

A half-shell soft case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface.

Soft shell design:

• Fills-up the MK3S build space (1-2mm to spare)
• Prints well at 0.2mm layer height
• No supports
• Intended for TPU or other flexible material
• Print with enough infill or enough perimeters for 100% filled walls
• Important settings to bridge the back texture optimally at 0.2mm layer height:
  • Infill > Fill angle: 135°
  • Infill > Bridging angle: 135°
  • Note: Verify that the first solid layer is bridging the back texture/ridges at 90°. At 0.2mm height, the first solid layer is layer #3.