Raspberry Pi Camera Mount for Mk3S(+) Remix
Description
PDFRemixed to fit this RPI camera module.
Hardware used:
| Item | Quantity |
| M3 hex nut | 1 |
| M3 heat set threaded insert | 1 |
| M3 x 10mm bolt | 1 |
| M3 x 16mm bolt | 1 |
| M3 x 30mm bolt | 1 |
This articulating camera mount can rotate along 2 axes so you can precisely point it where you want it. The camera lens is a few mm above the stock E3D v6 nozzle on a MK3[s], so you can easily see every layer as it goes down.
Created with OnShape.
Model origin
The author remixed this model.
