With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width.
My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for different spool widths.
The spool holder can be used with most 3D printers, so it is not limited to the Prusa Mini.
Fits nicely into the original Prusa Enclosure as an alternative to the included filament spool holder.
All you need to make it is:
2021.05.01: Added plug for thin tubes with 7mm ID.
2021.04.13: Added model for Screw-Mounting.
Use 3mf files to see printer setup.
Prints without support and Elephant-foot compensation and has a warping reducing design. Two perimeters, 2-3 top and 3-4 bottom layers and infill from 10-15%.
Shown frame is printed in Devil Design PETG (black) and feet is printed in Devil Design TPU (white).
Follow the pictures to see assembly.
You may need to sand the ends of the tubes to fit in the bearings - I had too ;-)
The author marked this model as their own original creation. Imported from Thingiverse.