Protective hard case for Nikon 1 J5 w/ 10-30mmPD

I made a hard case to protect my camera stored in the bottom of backpack.

Camera : Nikon 1 J5

Lens : 1 Nikkor VR 10-30mm PD-ZOOM

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2mm

Infill:

12%

Filament: SUNLU PLA Video =====

Prepare a wire with thickness around 1.5mm. Please make sure that is straight.

Finish the holes with a drill, then insert the wire. To fix the wire, bend the end of that slightly.

You can stick urethane foam (thickness should be less than 2mm) as shown above.