NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case

This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display.

The backplate is supplied in three differnt versions:

• With hole for a DHT22 Temperature/Humidity Sensor
• With mounting points for Adafruit Breakout Boards like the BME280
• With a closed back

There is a lot of space inside the case, so no problem to add more stuff.

All parts print without any support in the shown orientation.

Assembly Instructions:

The OLED display is press-fit. It can be secured with two little drops of Cyano-glue or similar glue.

The NODE MCU board is press-fit into the slots inside the case, pins are directed upwards.

The two parts of the case are screwed together with M2,5*8 screws from the bottom and the back.