Hexagonal table mirror frame, inspired by the JWST telescope and designed to use IKEA hexagonal mirrors (HÖNEFOSS).
The mirror is clipped into its housing and can be disassembled for cleaning and to avoid breaking the edges.
It is necessary to print only 2 small corners with supports, as seen in the attached image.
Printed in PETG to have more flexible and resistant edges. Carefully separate the piece from the bed so as not to break the edges.
Printed on a PRUSA i3 MK3S
Perimeters: 45mm/s
External perimeters: 30mm/s.
Nozzle: 0.4mm
Resolution: 0.2 mm
Perimeters: 4
In-fill: 20%
Printed in 5h 5m
The author marked this model as their own original creation.