fgc mkII upper with glock barrel adapter

I took the Barrel Adapter pieces from Louisthebeast glock adapter file and added them into the original upper and…
3
59
0
299
updated April 10, 2022

Description

PDF

I took the Barrel Adapter pieces from Louisthebeast glock adapter file and added them into the original upper and barrel retainer housing, making it a few less pieces and more durable as two pieces rather then 4. I added a little more thickness to the retainer inset piece as well as length giving a little more support for the barrel length wise. I also notched the back of the retainer were barrel sticks into chamber to keep from having to cut material out manually for barrel. Everything should be a nice snug fit. Minimum sanding or prep needed.

The first Barrel adapter I added a picatinny to the bottom side of it for flashlight and other accessories.

added a notched upper receiver if you choose to print his adapters, still saving from having to manually notch chamber wall.

Feedback is appreciated.

Print Settings

Supports:

Yes

Resolution:

1.6

Infill:

99-100%

Filament:

doesnt matter pla +


Notes:

The upper takes a little more filament for the supports, use tree supports if possible.

Category: Sport & Outdoors

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License