Parametric T-Track

T-Track is an incredibly useful addition to any jig or assembly table, and greatly expands your options for fixturing, clamping, alignment, and more.

This T-Track was designed based on both Rockler and Powertec T-Track, and should be compatible with both.

These are the T-Bolts that I use with it, however the model can be adjusted to suit your needs, including to accept common hex bolts.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

Yes

Supports:

No

Resolution:

.28

Notes:

I recommend printing on-end, using a raft. This is the best alignment for maximum strength.

I have a 300mm build height so it's not an issue for me, but if you can't print this high the next best orientation for long strips is on it's side, with tree supports enabled.

Use the test print to make sure your bolts fit first, and if it's too loose (or more likely too tight), you might want to tweak the horizontal expansion settings in your slicer for a more accurate print.

Category: Tools