Shims for 2 Digit Counter

I found the original design for this almost worked, but the tolerances didn't work with my printer. Not wanting to waste the print I made these shims in various sizes, I only used a few of them but it tightened up the mechanism enough to the point that it works reliably now. Thanks to the original creator for making the counter!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

30%

Filament: eSun PLA+ Yellow

Notes:

Print based on a layer height that divides into the listed height. ie. For the 0.6mm high shim, either use 0.2mm or 0.3mm layer height.