Ikea Hjälpa plug for Utrusta hinge system

I was building an enclosure for my MK3s+ with the Ikea Platsa cabinet and glass doors. Unfortunately, the only 60x60 cm glass door I found was the Enköping one (two 60x30cm doors), and there are no hinges that fit Platsa and Enköping simultaneously. The ones that fit the most are the Hjälpa, but the screws are very thin and the hole in the door is very wide, so I decided to design a plug to fit the screws in the door.
Simply print four plugs for each door, insert them into the holes, and screw the hinge into the new holes.

Thanks to Pixelfred for warning me that first version was scaled wrong. Version 2 is already scaled correctly.