Hexagon Fan Shroud

Fan shroud for the Hexagon Hotend, similar to the E3D Hotend.

Uses a 25 x 25 mm cpu fan

The profile is small, double check the clearance on your printer's head mount before printing. It's been optimized to use hotend mounts from the VertX extruder http://www.thingiverse.com/thing:137806

NOTE

Will not fit on the Hexagon used on the Lulzbot Mini. Lulzbot uses a custom Hexagon heatsink that's smaller (4 fin heatsink) vs the original (8 fin heatsink).

Instructions

• 25 x 25 mm cpu fan
• M3 screws

Designed to be inserted from the top. The shroud will rest on the top heatsink, preventing it from traveling down towards the heater block.