This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together.
9
54
0
675
updated January 4, 2020

Description

PDF

This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it. The assembly video is here https://youtu.be/IyjuDWjKk\_U

You need 4, 40mm or 45mm M3 Screws depending how you assemble it.

120mm Case Fan
https://amzn.to/2SRJS6W

USB Boost Module
https://amzn.to/2FjXpvS

Carbon Filter
https://amzn.to/2Ff4zlc

Follow us on YouTube at https://youtube.com/MakersMashup

Please consider helping support the channel through Patreon
https://www.patreon.com/makersmashup

Follow me on Twitter: https://twitter.com/MakersMashup
Instagram: https://instagram.com/makers\_mashup/
Visit our website www.MakersMashup.com

Print instructions

100% infill will provide a much stronger shroud and save time printing compared to 20% infill.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License