Honey Comb Screwdriver Holder Screw Mount Remix

I wanted to use the original model on my electronics bench, but it does not have a pegboard, so I remixed it for screws.
3h 53m
1× print file
0.20 mm
0.40 mm
54.00 g
357
1498
16
5345
updated April 5, 2022

Description

PDF

I wanted to use the original model, by herbert, on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and 5mm base) model found in the downloads section of the original model. 

I have also included the .f3d model for easy modifications as well as the other standard design file types. 

If you are looking for a recommendation on a great screwdriver set that will last a lifetime, I have tested and love these three sets and use them on a daily basis (arranged from most expensive to least):


*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.

Design File Included: .stl .f3d, step, .skp and obj files. 

Follow The Makers Workbench on:

I have only tested this model using the default 0.20mm 100mm/s preset in Prusa Slic3r 2.3.3 with the following amendments made.

Print Settings

  • 5-perimeters
  • 4-top layers
  • 4-bottom layers
  • 15% infill
  • Rectilinear Infill
  • Monotonic Top and Bottom Pattern

PLA Used: Polymaker PLA - https://amzn.to/35D0mbS  

Tags



Model origin

The author remixed this model.

License