Endstop lever for v-core 3 endstops

Replacement for the metal lever on rat-rig endstops.

Gives the enstops a longer throw without any rattling components and a softer touch than removing the levers.

The arm length was chosen to hit the xy joiner, so no endstop block is needed on the rail.

I use homing speed 300 with these.

Print in a material that has some flex. Mounts behind the endstop PCB. Pinch the metal lever to remove it.

Updates

27-07-2022: added a version with a centered hit point for the x-rail.