3D Models 3D PrintersAccessories

Filament

21 reviews
8,4,2 or 1meter 1.75 Filament (octagonal) use with increased flow by 12% - use to create dichroic (dual-color) filament.
In the contest Pranks, Tricks, Gags, and Jokes
185
968
28
6324
updated May 29, 2024

Model files

Colorchange
5 files
24-158Filament-3colorChange-3.5m.colored.3mf
24-158Filament-3colorChange-3.5m.colored.3mf
1 MB  |  May 28, 2024
24-158Filament-2colorChange-3.5m.colored.3mf
24-158Filament-2colorChange-3.5m.colored.3mf
1 MB  |  May 28, 2024
24-158Filament-3colorChange-3.5m.3mf
24-158Filament-3colorChange-3.5m.3mf
3 parts Cyan Magenta Yellow - Rainbow
1 MB  |  May 28, 2024
24-158Filament-2colorChange-3.5m.3mf
24-158Filament-2colorChange-3.5m.3mf
2 parts - Gradient
1 MB  |  May 28, 2024
24-158Filament.scad
24-158Filament.scad
3 kB  |  May 29, 2024
22-106Filament1m.3mf
22-106Filament1m.3mf
59 kB  |  April 5, 2022
22-106Filament2m.3mf
22-106Filament2m.3mf
119 kB  |  April 5, 2022
22-106Filament4mOD110.3mf
22-106Filament4mOD110.3mf
max for a 12×12cm bed
290 kB  |  February 22, 2023
22-106Filament8m.3mf
22-106Filament8m.3mf
377 kB  |  April 5, 2022
22-106Filament.scad
22-106Filament.scad
v1.2
1 kB  |  February 27, 2023
Filament27m-OD285mm.3mf
Filament27m-OD285mm.3mf
max 30cm (12") build plate - 27m ↦ ~24m after flow compensation
4 MB  |  April 20, 2023
23-179-FilamentSpiral.scad
23-179-FilamentSpiral.scad
simpler version without library but using "roof()" (activate feature in openSCAD 2023)
1 kB  |  December 1, 2023

Model origin

The author marked this model as their own original creation.

License