Nozzle drawer lock add-on

I came across https://www.thingiverse.com/thing:5235476 and liked the idea a lot. Some people in the comments were complaining about lose fit of the drawer. So I made a quick add-on to it which just consists of a modified base-plate with 4 extrusion pins which center the plate on the rail.

For the complete piece I did also make the holes a bit deeper, even though the original design worked for the longer nozzles they sit a bit more firmly in deeper holes.

The locking/centering plate can also be printed individually for those who already have printed a drawer. So the plate can be printed individually, slided over the existing drawer and if it works you can glue the pieces.

It is working pretty well on my Anycubic Vyper rails.

Print Settings

Printer Brand:

Anycubic

Printer:

Large Size Chiron

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Infill:

10% Gyroid

Filament: Purefil PLA black

Notes:

No special requirements. Print with flat side on printbed - upright printing direction.