3D ergonomic controller for Nintendo switch Joycons left and right.

1× print file

0.20 mm

0.40 mm

PLA

0.00 g

Prusa MK3/S/S+

10,055

27 k

524

104 k

updated December 7, 2023

Carlin Lusk

@CarlinLusk_1514341

Printed over a year ago with cheap PLA and they're still going strong. Super simple print. (edited)

CB Prints

@ChristianBurk

Great modell and very helpful, because we lost our straps
Print was easy - supports were a little bit difficult to remove

Overall great work!

Printed in PLA with 20% Infill

Gage Cullum

@GageCullum

Decided to use supports to avoid an unsupported cantilever, works great!

Joelusmc

@Joelusmc_1593893

Works great and comfortable in your hands thanks for the design.

Excellent model !!

Super :-)

Really awesome mod for Joycons

Printed well enough in PETG without any additional supports beyond the built in supports, and the built in supports were easy enough to remove. There were some loose overhangs right across the bottom of the main body, but I just cut those off and it doesn't diminish the function of the overall model! The bumper buttons seem to take a bit of extra force, or don't always align perfectly for me, so that's a bit of a letdown.