Din rail case for STM32 Nucleo-64 Boards

The spacing between the holes in the bottom is 18 mm.

There are three 2 mm holes for mounting the Nucleo board. You need mini screws like DIN 7981 2,2 mm x 6,5 mm. The holes in the bottom are 3.5 mm to comfortably fit M3 screws.

Other things you might enjoy:

• You can get the matching clip for the 35 mm DIN rail here: https://www.printables.com/model/161740-din-rail-clip
• And if you need a matching stand for the DIN rails on your lab bench you can find this here: https://www.printables.com/model/150786-din-rail-test-rack