DIN Rail Prototyping Stand V02

This is a stand when used with some DIN Rails makes a useful electronic prototyping rig.
6
19
0
228
updated April 1, 2022

Description

PDF

This is a stand when used with some DIN Rails makes a useful electronic
prototyping rig. You will be able to move your prototypes easily with it. Feet
are also provided to tilt a bit the stand (15 degrees). You will find on
Thingiverse or Printables many accessories. Search for DIN Rail.

M4 nuts and bolts are recommended for assembly. You will need 2 x 8 mm and 2 x
16 mm bolts if you are using the feet. Otherwise, 4 x 8 mm will be required.

You will need to print 2 of each. Minimal support material touching the plate
is needed for the rail holders. Print them upright. None is required for the
risers. An infill of 20% is recommended.

This object main web page is:  
http://www.ctheroux.com/din-rail-prototyping-stand-v02/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.

Tags



Model origin

The author hasn't provided the model origin yet.

License