Remixed
This version did 2 things:
1 - it added the cutout for the newer Robos with the connector on the stepper.
2 - it beefed up the side because I kept cracking it trying to install it.
********NOTE:*************
The beefed up side may cause this thing to smack the x-carriage assembly prior to the limit switch being pressed. If it is the case, try either adjusting the limit switch mount, or just swap out the limit switch screw with a longer one like I did.
Category: 3D Printer AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.