Ender 3 V2 Gantry Adjustable Pi Camera Bracket

I really liked this X axis camera mount and made a few changes

1. First I added a little hood to push the flex-cable out towards the back so the cable would be oriented properly as the gantry moved up and down
2. I added a notch on the case and backplate to help hold the enclosure shut
3. I stretched the arm out so you could better see past any cooling ducts
4. I added recessed holes to install M3 nuts into for ease of installation. The fit is very tight, so you'll want to set your printer for max dimensional accuracy

I used 12mm M3 socket cap bolts to install the bracket

I printed the arm/nutplate at 0.2mm in PETG+ and the housing at 0.12 in PLA+ in the hopes that the PETG would retain strength and hold a nice tight fit over time

Compatible with BL-Touch and CR-Touch