This is a 100mm x 100mm VESA mount adapter for an Acer H236HL. It should work for any acer monitor with a metal mount shaped the same as mine (see pictures). You have to re-use the metal part of the stand that comes with the monitor. I used custom screws because I lost the original ones, so I'm not sure if the originals will be long enough. You may also have to re-seize or drill out the holes for the screws for the VESA mount, I just sized them to random screws that I had on hand.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Infill:
15
Filament:
Push Plastics PETG
Notes:
Use lots of walls! Walls give strength, not necessarily infil. I printed these with 4 walls with a 0.6mm nozzle on only 15% infill with gyroid. You will want to use a number of walls that gives a similar or greater overall thickness as my settings. I also recommend using PETG or other filaments with strong layer adhesion.
Category: ComputerThe author marked this model as their own original creation. Imported from Thingiverse.