Torus Part Cooler for Toranado Precision Geared Extruder v2.1

This improved part cooler will blow air in an arc of 250deg around the nozzle (original: 75deg). The hotend quickchange function still works with the 20x16x12mm heater block. If you have mounted your heater block so the cartridge is on the other side, just mirror the .stl in your slicer.

I made this for the LH version of the toranado: https://www.thingiverse.com/thing:1246951 - check on your own if it works for the other versions!

Print Settings

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2

Infill: 

20

Notes:

Print like original

Category: 3D Printer Extruders