A little piece to adapt the notches to turn the mount of the SM7B 90 degrees, so that the output jack is oriented 90 degrees turned, because I had problems with the clearance with my boom arm but theres more than enough space on the "underside".
In order to being able to unscrew the long screw holding the assembly together you have to disassemble the two knobs on the mic (reassambling needs a bit of fiddling and time, rember the order of washers!) and then unscrew the long screw holding the holder in place. Put the adapter in and assemble everything back together.
Print without support, the overhangs might need minimal cleanup.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
50%
Filament: DasFilament PLA Black Matt
Category: MusicThe author marked this model as their own original creation. Imported from Thingiverse.