Shroob (Mario and Luigi)

Hey just a multipart print of one of those Shroob guys from Mario & Luigi: Partners in Time (from 2005 lol). 

You don't need an MMU, so you can just print each color separately. I ended up using 5 colors: Purple, Light Blue, Black, White, and Red/Magenta.

No superglue needed either! Can't stand the stuff (🤮🤮🤮) but also I don't use it in the case that I want to recycle a print in the future for whatever reason.

Also, one warning. The claws are SHARP. While the main body I print at 0.20, the smaller details like the claws and face details I use much smaller layer heights, resulting in the sharp claws. You may need to sand/chop the pointy ends especially if you are giving this as a gift to a small child although most kids who played the game should know better by now.

Assembly is straightforward, but if you don't know how to print something I've included all the 3mfs I used to show how I printed each part. 

There are also optional Aligners (but they're called Dot Connector, Cap Connector) to help you align/connect the dots on the cap, as well as the cap to the body.

If you need any part adjusted for whatever reason, just let me know and I'll see what I can do. <3