https://www.thingiverse.com/thing:4665052 provided a single piece model that was too big to print on Prusa MK3S, so a cut the model using Shapr3D on my iPad and added assembly points, supports, and cross-bars that use M3 screws and nuts.
40 M3 nuts and screws required to assemble (though may be overkill, it’s solid when assembled. (Update, since a few folks have asked: Qty 28 M3x8 and qty 12 M3x12 screws.)
Update: I removed the file for left base piece as I accidentally posted it as a different size than the right base piece. Just print the right base piece twice and align together along the middle!
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
20
Filament: Overture PETG Black
Notes:
I used 20% infill for all parts except Right-Bottom and Left-Bottom where I used 40% to give some additional structural integrity where the weigh is supported on those tabs.
Category: Hobby
The author marked this model as their own original creation. Imported from Thingiverse.