The design is based on this Instructable by StefanoS48.
I used the code by freeasabeer who has modified the original code to work with Autodesk Fusion 360:
https://github.com/freeasabeer/SpaceMouse
- pan: Fusion 360 pan mode (moves by simulating holding the middle mouse button)
- rotate: Fusion 360 rotate mode (rotates part by simulating holding SHIFT key + middle mouse button)
- zoom: Fusion 360 zoom mode (zooms in/out by simulating rolling the middle mouse button)
The 3 space mouse buttons have the following functions:
- button 1 (Left): simulates a left mouse button
- button 2 (Middle): toggles between default, pan and rotate modes
- button 3 (Right): simulates the ESC key
Joystick switch functions:
- short press: simulates the F6 key (fits to zoom)
- long press: activates the zoom mode.
To zoom in: while keeping the joystick pressed, push the joystick.
To zoom out: while keeping the joystick pressed, pull the joystick.
When the joystick switch is released, the space mouse switches back to the previous mode that was active (normal, pan, rotate).
Tags
The user re-uploaded this model. The user is not the original author of the model.