Power Cord / Cable Strain Relief

I feared yanking the power cord hard enough to pull the wired from the power supply. Mounts in the the 2020 extrusion channel nicely with a M3x10 screw and a drop-in M3 T-nut.

Minor update.

Magenta (thought it was more red) print was PETG with 0.3mm layers.

Instructions

I printed with .25mm layer height using PLA and .3mm layer height using PETG.

Needed:

• M3x10 screw
• M3 drop-in t-nut if you are bolting it to 20x20 extrusion.
• a power cord you don't want yanked out