Schotten Totten game box insert

I didn't like how the cards and tiles in the game Schotten Totten were just loose in the box, so I designed an insert to hold them in place better. Take out the decorative inlay (you can fold it and put it in the bottom of the box), put in the insert, and there is a space each for the stone border tiles and the cards, and room for a finger to get them out. The instructions will fit nicely on top.

My Print Settings

Printer: Mini+

Rafts:  No

Supports: Yes

Perimeters: 3

Nozzle: 0.4mm

Layer Height: 0.25mm (you can probably go coarser without issue)

Infill: 0%

Filament: Prusament PETG (but anything should work)

Notes:

• I have the IELLO printing of the game (see pictures), I don't know if the insert will fit other editions.
• Two versions are available: one with shallower spaces for the pieces that has more support and takes longer to print, one that prints faster but leaves a bit more free space in the box.
• Print time for me was around 7 hours on the deep version.

Please let me know if you make my prints, I'd love to hear how they work for you!