Case for ESP32 radio

I have built an ESP32 radio (https://github.com/Edzelf/ESP32-Radio) on a 70x50mm perfboard.

The following key-components were used:

Speakers https://www.aliexpress.com/item/4000127737256.html?spm=a2g0s.9042311.0.0.22f54c4devAQBT

MP3 decoder VS1053B https://www.aliexpress.com/item/32809457097.html?spm=a2g0s.9042311.0.0.27424c4dQavbli

Perfboard (70x50) https://www.aliexpress.com/item/32588853051.html?spm=a2g0s.9042311.0.0.27424c4d87npFC

Audio Amplifier https://www.aliexpress.com/item/32947566785.html?spm=a2g0s.9042311.0.0.27424c4d87npFC

ESP32 30 pin https://www.aliexpress.com/item/32864722159.html?spm=a2g0s.9042311.0.0.27424c4d2KJadN

Micro-USB port https://www.aliexpress.com/item/32838750325.html?spm=a2g0s.9042311.0.0.27424c4dYuC8OP

2.2" TFT https://www.aliexpress.com/item/4000502419587.html?spm=a2g0o.productlist.0.0.6af29dfcDhAsys&algo_pvid=9c3ac323-f9c0-4bf1-90d4-f2b7ba0ab5f4&algo_expid=9c3ac323-f9c0-4bf1-90d4-f2b7ba0ab5f4-5&btsid=0b0a0ac216032207862953698ec355&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

Any rotary encoder with click arduino style.

Speaker grills, displaybezel and resonance cans to be glued in place with superglue. The rest to be screwd together with M3 screws. Pretapping advised!

Choose any knob style of your liking

OpenSCAD file included as always for easy adapting to your personal needs.

Enjoy listen to the music!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

10

Filament: Noyes PLA wooden, bronze, black