GBS Control Case for GBS 8200 with BNC for RGBs

My version of GBS Control case for GBS 8200 and two sizes of ESP8266 modules, plus RGBS BNC connectors. The two sizes…
4
50
2
1002
updated March 19, 2022

Description

PDF

My version of GBS Control case for GBS 8200 and two sizes of ESP8266 modules, plus RGBS BNC connectors.

The two sizes of the ESP8266 module supported are:

48 x 25mm

58 x 31mm

Please choose the corresponding one when you print.

Project is put together with M3 hex screw and nuts. The outer shell uses 22.8mm ones. The sockets use 11mm ones.

I had to design sleeves for the hex screws since the longest one I had was 22.8mm. You may want to use raft when printing the screw sleeves. However mine didn't require that.

The top and bottom pieces are printed better upright.

The rim is printed better upside-down. Support is recommended for better port accuracies.

The supported BNC connector is 9.3mm in diameter, panel mounted.

There is a version of rim with a hole for a 3.5mm jack. It's for my circle of RGBS devices and you might wanna take a reading: https://github.com/jeffqchen/Console-VGA-Dongle-Series

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.16

Infill:

15%

Filament: Generic PLA/PETG Grey & Red


Notes:

Nope.

Category: Video Games

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License