PlayStation 3D Logo

I'm sure you've wondered what the PS logo looks like from all the other angles besides the intended. So here's your chance.

This design is intended to be snap-fit. Print each part and put them together at ease.

Base

The base part is designed to be ironing-friendly. No more ugly streaks! Please slice this part at 0.16mm for the best outcome.

Filament Change

If you wish to do multi-color print, at 0.16mm layer height, insert a change at layer 48.

*If you can't do multi-color, use nail polish on the text instead and it shouldn't look half bad.

Support

Only the colored parts need support for better geometries.

Note

• You only need the rail and the colored parts to build the logo. The base is for a better and complete aesthetic and can be omitted.
• Please be prepared to use superglue, as the stumps on the base may snap off. Since this is only a stationary show piece, some glue shouldn't hurt anything ;)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

15

Filament: Generic PLA