Vacuum Robot Ramp / Door Ramp - flat bottom

A ramp for the vacuum robot to get get over heigher door thresholds. The ramp contains dove-tail joints to connect…
44
423
0
2672
updated March 19, 2022

Description

PDF

A ramp for the vacuum robot to get get over heigher door thresholds.

The ramp contains dove-tail joints to connect multibel ramps without screws.

You may want to use some velcro tape to the front side so you can attach the ramp safely to your step and it does not move when the robot runs over it.

The ramp dimensions are:

  • width 20 cm
  • height 1.8 cm
  • depth 8 cm (min depth for my eufy robot)

Customize

For easier modification I added the step files and also the FreeCAD file.

In FreeCAD you can edit it very easily using the "Dimensions"-Spreadsheet.

To safe print time and filament use the following settings:

  • Top Layers = 0
  • Bottom Layers = 0
  • Infill Density = 20%
  • Infill Pattern = Triangels or Grid

With these settings my print time is 1:30h and uses 23g fillament

Print Settings

Printer: Ender 3 V2

Supports: No

Resolution: 0.36

Infill: 20% - Triangles or Grid

Filament: PLA

Build Plate Ahesion Type = None (or make the ramp smaller)
Top Layers = 0

Bottom Layers = 0

 

 

 

Category: Household

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License