Pegboard Pegs

These hooks are perfect for hanging hats, keys, necklaces, or anything with a loop from a pegboard! They are specifically sized for a board with 1 in (25.4mm) space between holes, and a thickness of 0.26 in (6.7mm). 

Printed on my Artillery Sidewinder X1, at 0.2 layer height. I recommend 3 walls and 15% density of whatever infill you like. The walls give it most of its strength.

Filaments shown are MatterHackers Build Series PLA, PolyTerra PLA by Polymaker, and Wood PLA by Priline.